you used to be alright what happened shirt

Download Article

Download Commodity

Bleach is common household cleaning agent that can be used in a variety of different means. Yet, one of its most common uses is on clothing. Bleach is used to both whiten dress and modify the colors of dress that are non white. There are a handful of dissimilar methods for sprucing up a shirt past whitening it, by brightening it, or by giving it a "makeover" with bleach.

1. 1

   Gather the laundry that needs to exist done and bleached, including your shirt. Check the shirt's label for bleaching instructions, looking carefully for "not-chlorine bleach only."

   • When an shirt requires non-chlorine bleach, you lot must use oxygen bleach or hydrogen peroxide to whiten information technology.^[1]
   • Annotation if the shirt has a label indicating that it should non be bleached. In this instance, you should choose a different shirt that can exist bleached.

2. 2

   Set your washer to the correct wash bike and temperature and turn it on. Depending on the clothing you are washing, y'all desire to be sure to cull the right settings so as not to shrink or otherwise ruin the clothing.

   Advertisement

3. 3

   Add laundry detergent to the water. Equally your washer fills with water, add the appropriate amount of detergent for the size of the load. The water will begin to bubble when the detergent is added.

4. 4

   Mensurate ½ cup of bleach and either pour it directly into the bubbly water or into the bleach dispenser on your washer. ^[ii] Be sure to do this before you lot add together the dress, considering pouring it in subsequently you add together the apparel could cause bleach spots in vesture that is not white.

   • It is recommended that the wash bicycle run for v minutes before adding bleach for best results.^[iii]
   • Use a defended measuring cup if your washer does non have a bleach dispenser. Do non utilise this measuring cup for any other purpose.

5. 5

   Put your shirt and other laundry in the launder and close the washer lid. It is now time to let the washer run its cycle with the article of clothing in it, including your shirt.

6. 6

   Pull your shirt from the washer at the end of the cycle and examine it. If the shirt is whitened or brightened to your satisfaction, dry information technology co-ordinate to the characterization (i.due east. tumble dry out, hang dry, et cetera). If the shirt is not withal as white or vivid as you would like information technology to be, then it is recommended that you put it through another cycle with bleach.

   Advertising

1. i

   Collect the materials you need for this process. Aside from the advisable habiliment, there are only a few other materials that you need.

   • The shirt you want to bleach
   • Two buckets
   • Bleach
   • Hydrogen peroxide or bleach-neutralizing solution
   • A long wooden spoon
   • Condom gloves

2. ii

   Clothes in old wearing apparel and put on the rubber gloves. As you are working with bleach, it will ruin the clothing you are wearing if an blow happens. Rubber gloves are also necessary to protect the bleach from straight touching your skin.

   • Vesture a long-sleeved shirt and long pants, if possible, to take extra steps to foreclose the bleach from touching your peel.

3. 3

   Make full two buckets with solutions. Set them to the side when y'all are done, and be sure to leave your sink clear for rinsing the shirt later. Make enough of each solution and so that the shirt tin be submerged in them.

   • One bucket needs to be filled with one function bleach to v parts cold water.
   • The other saucepan needs to be filled with ane part hydrogen peroxide to i function h2o. You tin can also mix a bleach-neutralizing solution co-ordinate to the manufacturer'due south instructions.

4. 4

   Put the shirt into the bucket containing the bleach solution. Fully submerge the shirt in the solution, and stir it around using a long wooden spoon that is no longer used for cooking.

   • Gently swirl the shirt around in the solution to assist it in becoming fully saturated.
   • Take care non to splash the bleach solution while yous do this.

5. 5

   Allow the shirt to soak for anywhere from 10 minutes to ane hour. The soak fourth dimension will vary depending on how much colour yous want to bleach out of the shirt and how strong the solution is.

   • Bleaching the shirt all the mode to white will take shut to an hour or longer, especially if the shirt is originally a dark color.
   • You lot tin can pull the shirt from the bleach solution before information technology reaches white if you find that y'all like a lighter shade that it has become in the bleaching process.

6. 6

   Remove the shirt from the bleach solution and squeeze backlog solution out of it over the saucepan. Save this step until yous are pleased with the color of the shirt. If it is not still completely white or non to a color that you like, and so go along it in the bleach solution until it is satisfactory.

7. 7

   Rinse the shirt under cold h2o in the sink. Thoroughly rinse all areas of the shirt, beingness sure to lift whatsoever folds or creases and running cold water over those areas.

8. 8

   Submerge the shirt in the bucket of hydrogen peroxide or bleach-neutralizing solution. Ensure that the unabridged shirt has been submerged into the solution so that it is saturated.

9. nine

   Leave the shirt to soak for 15 minutes. This is an important pace because this neutralizes the bleach, significant that information technology makes it so that the bleach can no longer damage the fibers of the cloth.

10. 10

    Rinse the shirt again under cold water in the sink. Lift all folds and creases again to brand sure you rinse out all of the bleach-neutralizing solution.

11. 11

    Launder the shirt equally usual, either by mitt or in the washing machine. Later laundering the shirt, dry out it according to the instructions on the characterization. Information technology should be fix to article of clothing after this final step.

    Advertisement

1. one

   Gather the materials you need for the project. ^[iv] This is a quick and piece of cake DIY projection that only requires a few materials.

   • A shirt
   • Bleach
   • A stencil (pre-made or homemade)
   • Spray agglutinative
   • Spray bottle
   • A newspaper towel

2. 2

   Lay your shirt apartment on a table or the floor. Make sure that information technology is clean and without wrinkles so that the bleach spraying comes out correctly.^[v]

   • Information technology is recommended to lay down a tarp, an sometime bed canvass, or another protector if you are working on carpet.

3. 3

   Slide a slice of cardboard inside the shirt to protect the back from being bleached. Make sure that the piece of paper-thin that yous choose is big enough to cover the width and superlative of the shirt.^[6]

   • The paper-thin should be visible in the neck of the shirt and should extend all the way to the bottom hem of the shirt. It should besides cover as much of the width of the shirt every bit possible.
   • Again flatten the shirt to remove wrinkles once you lot have slid the paper-thin within.

4. iv

   Attach your stencil to the shirt. In that location are a couple of different means to do this, depending on the type of stencil you are using.^[7]

   • If it is a pre-fabricated stencil, you lot can adhere information technology by lightly spraying spray agglutinative onto the back of it. Then, set it on the shirt and firmly press down around all of the edges.
   • If y'all brand your own stencil, you want to be sure to cut information technology out of adhesive vinyl. And so, again, you can set it on the shirt and press downwardly firmly.
   • Transfer your stencil to transfer newspaper if it has loose pieces (such every bit eyes, dots, et cetera) by pressing the transfer paper on elevation of your stencil. Then, advisedly remove the stencil from the paper backing. Later on that, press the stencil on your shirt, firmly press down around the edges, and gently peel up the transfer paper.

5. 5

   Cascade ¼ cup of bleach into a spray bottle. Then, set the spray canteen to a super fine mist. You lot practice not desire it on a larger mist or spray considering it will make a mess and achieve areas of the shirt that you lot do not want bleached.^[8]

   • Diluting the bleach is non necessary.
   • Examine how big your mist is past testing the spray on a spare piece of cardboard. Spray the cardboard, with the spray bottle held about half dozen-8 inches away, and determine if the mist is appropriate.

6. 6

   Spray a light glaze of bleach onto your shirt all around the stencil. Think you are just trying to mist the shirt and non soak information technology, so just a few sprays all around the area of the stencil will suffice.^[nine]

   • Concord the spray bottle about vi-8 inches away from the shirt.

7. 7

   Absorb the area with a paper towel. If you do accept any large drops of bleach, quickly absorb the whole sprayed expanse with a paper towel to clean them up to avert large bleach spots.^[10]

8. 8

   Give the bleach upwards to two minutes to pull out the color. During this time, the sprayed areas may change to some other color earlier lightening to a lighter shade of the shirt's color. This is but the bleach working through pulling out the color.^[eleven]

   • Do not spray more bleach until you are certain that the color is done changing.

9. ix

   Repeat lightly spraying the shirt, blotting upward excess bleach, and waiting if the sprayed areas do non lighten enough for your liking. Be sure to requite the two minutes of expect fourth dimension before doing this.

   • Generally speaking, you exercise not want to completely bleach the area to white. You are only aiming for a lighter shade of the shirt's colour (e.g. for a ruddy shirt, the spots will fade to pink).

10. 10

    Peel up the stencil once the shirt is exactly how you want information technology to be. ^[12] Brand sure to choice up any loose pieces of your stencil, as well.

11. eleven

    Hang the shirt to dry and check for crystallized bleach. The bleach will crystallize on the shirt if you were a little too heavy with the bleach spray. You will notice it every bit a fine powder on the shirt.^[xiii]

    • Put the shirt through a wheel in the dryer for near thirty minutes if yous notice crystallized bleach. Exercise not wash it, every bit the water volition cause the bleach to reactivate and further bleach your shirt.

12. 12

    Rinse the shirt in cold water once it is completely dry and free of crystallized bleach. Then, you can hang it to dry. Finally, you will exist able launder the shirt every bit usual without fear of ruining your design.^[xiv]

    Advert

1. 1

   Bring all necessary materials to your work area. A few items are required for safely bleaching designs into cotton t-shirts.^[15]

   • A shirt in a nighttime or brilliant colour
   • Bleach
   • Rags or cardboard
   • An object to block the bleach, such as duct tape or agglutinative vinyl
   • Rubber gloves

2. ii

   Lay the shirt flat on the flooring or another surface. Protect the surface with a tarp, old bed sheet, or other protector, if necessary.

3. 3

   Slide the rags or paper-thin into the shirt to protect the dorsum from being bleached. ^[sixteen] Again smooth wrinkles out of the shirt to arrive flat again after doing this.

   • Brand sure that the rags or cardboard cover the inside of the shirt all the way up to the neck and all the way down to the bottom hem of the shirt. They should as well cover the shirt's width.

4. 4

   Choose the design that you want to bleach into the shirt. You can create a design past cut shapes or a stencil out of the agglutinative vinyl, or you can create a design with duct tape. Here are some ideas:

   • A name or title
   • A geometric shape
   • A piece of fruit, vegetable, or other food item
   • A criss-cantankerous pattern
   • A zig-zag pattern

5. 5

   Apply the design to the shirt. Locate where on the shirt you want the design to sit (i.e. the eye, the top left, et cetera).

   • Gently lay the design on the shirt where you want information technology. Press firmly downwards on all of the edges to secure the duct tape or adhesive vinyl.
   • Consider transferring your stencil, if that is what you used, to transfer paper if information technology has loose pieces (such as eyes, dots, et cetera) by pressing the transfer paper on top of your stencil. Then, carefully remove the stencil from the newspaper backing. Afterwards that, press the stencil on your shirt, firmly printing downward around the edges, and gently peel upward the transfer paper.

6. half-dozen

   Cascade bleach into a drinking glass container or measuring cup. Pour as much as y'all remember you will need. You can add more than later, if yous find that you need to practice then.

7. 7

   Dip a folded-up rag or sponge into the bleach. Each will create a slightly different look, depending on what you want the design to await like.^[17]

   • The rag will make clean edges effectually the pattern, while the sponge will make fuzzy edges.
   • Be certain to put on your prophylactic gloves before starting to handle the bleach for this step.

8. 8

   Blot the shirt all around the design. Use the rag or sponge to gently blot the bleach all effectually the design, and then that the areas behind the pattern stay colored and everything else becomes bleached.

   • If bleach bleeds into the area behind the design, you lot can touch it upwardly later with a fabric-mark in the right color.^[18]

9. nine

   Wait for the bleach to take issue. Information technology may take upwardly to a few minutes for the bleach to pull out all of the color.

   • If the fading is not to your liking, yous tin can blot around the design with bleach again to make it fifty-fifty lighter. Proceed in mind that it will take longer to bleach the shirt lighter, so exist sure yous are prepared with enough time.

10. ten

    Peel the stencil or blueprint off of the shirt. When the design has been bleached to your satisfaction, gently pare upwards the pattern from the shirt.

    • Drying your rubber gloves on sometime clothing or fabric before touching the shirt again will be helpful to avoid accidental bleach spots from whatsoever bleach that got on your gloves.

11. eleven

    Remove the rags or cardboard and rinse the shirt in cold water. Carefully pull out the rags or cardboard from in between the layers of the shirt. Immediately move the shirt to a sink to rinse it under cold h2o.

    • Rinsing the shirt stops the bleaching process.

12. 12

    Dry the shirt accordingly. You can either put information technology in the dryer or hang information technology to dry out, depending your preferences or the shirt's instructions.

    • You can wash it every bit usual later this, if y'all would like.
    • The shirt will now be ready to vesture.

    Advert

Ask a Question

200 characters left

Include your electronic mail address to get a message when this question is answered.

Submit

Advertisement

• Have patience while bleaching, because it might take some time to bleach to all white or to a lighter shade of the original colour that y'all similar.

• Sometimes threading on cotton shirts is washed with polyester thread, which volition not bleach every bit cotton does. You can pick out the threading and sew the hems once more with white thread (or another color) to match the shirt.

Thanks for submitting a tip for review!

Advertisement

• Ever ventilate your home when doing bleach projects, similar in Methods 2-iv above. Open windows and turn on a fan to air out the fumes.

• Handle bleach carefully by protective gear and taking care not to splash or spill it.

• Do not combine bleach with vinegar, ammonia, or other household chemicals, as information technology will produce harmful fumes.^[19]

Advertisement

About This Article

Commodity Summary X

To bleach out the color in a shirt, start by filling a bucket with i part bleach and 5 parts h2o and a second bucket with equal parts water and hydrogen peroxide. Then, submerge your shirt in the bleach solution, and let information technology soak for ten minutes to 1 hour. Adjacent, take your shirt out of the saucepan and rinse it off using common cold water. Finally, submerge your shirt in the hydrogen peroxide solution for xv minutes, and then rinse information technology off with cold water again. To acquire how to brighten a dirty shirt by bleaching it, read on!

Did this summary help you lot?

Cheers to all authors for creating a page that has been read 79,088 times.

Did this commodity help you?

pelayosenguen.blogspot.com

Source: https://www.wikihow.com/Bleach-a-Shirt

Share this post